Building a rudimentary CW key base

In order to gain more confidence in CW (and get over key fright!), I decided to use VBand (https://hamradio.solutions/vband/), which allows you to connect your key to your computer and have CW QSO’s over the internet. I have the palm radio pico paddle. which is great for portable operations, but really needs a good magnetic base in order to be stable. Initially, we taped the key to the desk, but this still allowed some wiggle room, and led to miss-keying, so we needed a better solution. The idea was to put a sheet of magnetic metal onto a silicone mat. The silicone mat would prevent the metal sheet from moving around. Handily, the soldering mat we use happened to be made out of silicone, and would be a good size for the key base. The only thing we needed to find now was the magnetic metal.

After browsing the DIY shop, we came back with a large sheet of magnetic metal (taking the key with us to test the magnetic strength). This was much too large for the silicone mat, so we needed to cut it down to size. The only metal-working tools we had was a metal saw, so we used that to slice through the metal sheet. We used a dremel to carefully saw through the metal sheet when the metal saw couldn’t get far enough down anymore, breaking a few saw blades in the process!

Cutting the metal with a saw and dremel.

The metal sides needed to be sanded down, as the sawing had created some sharp edges. We also rounded the corners to make them less sharp. As you can see in the picture below, the hand sawn edge is not perfectly straight, but it does not need to be for our purposes.

The metal sheet, after being cut to size and sanded

Finally, we taped the metal sheet to the silicone mat, and tested it out. The key is rock-solid on the metal sheet. and the silicone mat works really well to prevent slipping across the table. There is no excuse now not to practise keying on VBand!

The finished base, complete with CW key.

Leave a Reply

Your email address will not be published. Required fields are marked *